Tel: 01332 986061

Soil Remediation BK350-10

Soil Remediation BK350-10



Concentrated bacterial powder for use in Hydrocarbon contaminated soil BioRemediation projects and treatments.

  • Effective, environmentally safe solution for rapid oil and organic degradation.
    Supplied in a water soluble 250 gm sachet for ease of handling and accurate dosing.
  • Biological action reduces oil and contaminants to carbon dioxide and water.
  • Reduces risk of pollution liability and lowers disposal costs.
  • Used in situ and reduces cost on landfill.
  • Product requires no hazchem labelling and is therefore safe in use, storage and transport.
  • Does not contain any harsh chemicals.


Product Description

BK350/10 is a specially formulated microbial product, which has been designed
to accelerate the degradation of petroleum hydrocarbons such as gasoline,
diesel, benzene, toluene, and xylene as well as other organics in soil decontamination
applications. Typical areas include contaminants from land areas such as
Factory Sites, Railway Tracks, Sidings and Embankments, Garage Forecourts,
Oil Refineries, Fuel Storage Depots, Brownfield Developments, Power Cable Joint
Bays, Windrows and BioPile remediation systems. This hydrocarbon treatment can be done insitu.

BK350/10 rapidly establishes a biomass which can effectively degrade the complex
structures of petroleum hydrocarbons, particularly those found at refinery sites which
are very difficult to degrade. The use of a broad spectrum of bacteria results in
faster degradation rates and thus quicker clean up of contaminated soil. To ensure
optimal performance they are produced and blended with high potency nutrients and

BK350/10 is effective even in saline environments. Many bacteria cannot tolerate
saline conditions making the biodegradaton of hydrocarbons particularly difficult in
such applications. BK350/10 contains a blend of bacteria, which has been specially
adapted to operate in saline environments.

BK350/10 has an increased tolerance to high levels of chemicals found in effluent
from aerobic wastewater treatment plants which can prove toxic to normal biomass.
These strains of bacteria are also capable of producing bio-surfactants, which help to
accelerate the rate of degradation of relatively insoluble chemicals.

Directions for use

Directions for use

BK350/10 can be used in dry or wet applications. Rake or till the soil and apply at the
rate of 1 Kg per 20 square metres of contaminated soil. Maintain the treated area as if
growing a lawn and water regularly.

For up to 1500 cu.mtrs use 100 Kgs of BK350/10 added to 400 Kgs of NPK fertiliser to
Treat 1500 cubic metres of soil.

For larger projects a simple bio-reactor system can be set up on site to make it more
economic to treat full scale brownfield re-development sites.

BK350/10 when used in wet applications and direct injection systems, should be
mixed with clean warm water at a temperature of approximately 30 deg C for at least
2 hours before application to soil.

BK350/10 contains no harsh chemicals or solvents. The micro-organisms present
are all naturally occurring and are non-pathogenic to humans or animals.

Actual product label / packaging may differ from image shown